Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LYF 220 2F

LYF 220 2F

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

100mm
d · Bore diameter
210mm
J · Pitch circle diameter
124kN
Cdyn · Dynamic load rating
93kN
Co · Static load rating
13.5kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYF 220 2F

Cross references

ManufacturerDesignation / part number
INARCJ100

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYF 220 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter100mm
LOverall width265mm
ADistance from the housing flange to the front of the inner ring of the bearing93.6mm
A1Total housing width70mm
A2Housing flange thickness25mm
JPitch circle diameter210mm
NDiameter of attachment slot27mm
kgMass13.5kg
CdynDynamic load rating124kN
CoStatic load rating93kN
PuFatigue load limit3.35kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYF 220 2F
Technical drawingClick to enlarge