Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LKF 218 2F + H2318

LKF 218 2F + H2318

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

80mm
d · Bore diameter
187mm
J · Pitch circle diameter
102kN
Cdyn · Dynamic load rating
79kN
Co · Static load rating
11.6kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKF 218 2F + H2318

Cross references

ManufacturerDesignation / part number
SNRUKF218H
NTNUKF218D1;H2318X
FAGUKF218 + H2318X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKF 218 2F + H2318

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter80mm
LOverall width235mm
ADistance from the housing flange to the front of the inner ring of the bearing88.6mm
A1Total housing width63.4mm
A2Housing flange thickness23.4mm
JPitch circle diameter187mm
NDiameter of attachment slot23mm
kgMass11.6kg
CdynDynamic load rating102kN
CoStatic load rating79kN
PuFatigue load limit1.96kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKF 218 2F + H2318
Technical drawingClick to enlarge