Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LKF 216 2F + H2316

LKF 216 2F + H2316

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

70mm
d · Bore diameter
159mm
J · Pitch circle diameter
72kN
Cdyn · Dynamic load rating
54kN
Co · Static load rating
7.8kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKF 216 2F + H2316

Cross references

ManufacturerDesignation / part number
SNRUKF216H
NTNUKF216D1;H2316X
FAGUKF216 + H2316X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKF 216 2F + H2316

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter70mm
LOverall width200mm
ADistance from the housing flange to the front of the inner ring of the bearing76.5mm
A1Total housing width53.6mm
A2Housing flange thickness22.1mm
JPitch circle diameter159mm
NDiameter of attachment slot19mm
kgMass7.8kg
CdynDynamic load rating72kN
CoStatic load rating54kN
PuFatigue load limit1.53kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKF 216 2F + H2316
Technical drawingClick to enlarge