Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LYF 214 2F

LYF 214 2F

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

70mm
d · Bore diameter
152mm
J · Pitch circle diameter
62.4kN
Cdyn · Dynamic load rating
44kN
Co · Static load rating
6.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYF 214 2F

Cross references

ManufacturerDesignation / part number
INARCJ70
SNREXF214
NTNUELF214D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LYF 214 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter70mm
LOverall width193mm
ADistance from the housing flange to the front of the inner ring of the bearing82.6mm
A1Total housing width50.3mm
A2Housing flange thickness21.3mm
JPitch circle diameter152mm
NDiameter of attachment slot19mm
kgMass6.7kg
CdynDynamic load rating62.4kN
CoStatic load rating44kN
PuFatigue load limit1.86kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYF 214 2F
Technical drawingClick to enlarge