Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LYF 215 2S

LYF 215 2S

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

75mm
d · Bore diameter
159mm
J · Pitch circle diameter
66.3kN
Cdyn · Dynamic load rating
49kN
Co · Static load rating
7.6kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYF 215 2S

Cross references

ManufacturerDesignation / part number
INARCJ75
SNREXF215
NTNUELF215D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
LYF 215 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter75mm
LOverall width200mm
ADistance from the housing flange to the front of the inner ring of the bearing88.8mm
A1Total housing width53.6mm
A2Housing flange thickness22.1mm
JPitch circle diameter159mm
NDiameter of attachment slot19mm
kgMass7.6kg
CdynDynamic load rating66.3kN
CoStatic load rating49kN
PuFatigue load limit2.04kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – LYF 215 2S
Technical drawingClick to enlarge