Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 218 2F+H 2318

LK 218 2F+H 2318

Y-Ball Bearings With Adapter Sleeve

90mm
d · Bore diameter
160mm
D · Outside diameter
102kN
Cdyn · Dynamic load rating
79kN
Co · Static load rating
4.68kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 218 2F+H 2318

Cross references

ManufacturerDesignation / part number
SNRUK218 + H2318
NTNUK218D1;H2318X
FAGUK218 + H2318X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes
LK 218 2F+H 2318

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter90mm
DOutside diameter160mm
BWidth inner ring58mm
CWidth outer ring36mm
d1Outer diameter inner ring112mm
EDistance from raceway centre to the hole for lubrication10mm
d2Bore diameter-adapter sleeve80mm
LWidth adapter sleeve86mm
WKM nut outside diameter120mm
YKM nut width18mm
CdynDynamic load rating102kN
CoStatic load rating79kN
PuFatigue load limit1.96kN
kgMass4.68kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 218 2F+H 2318
Technical drawingClick to enlarge