Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 213 2F+H 2313

LK 213 2F+H 2313

Y-Ball Bearings With Adapter Sleeve

65mm
d · Bore diameter
120mm
D · Outside diameter
57kN
Cdyn · Dynamic load rating
40kN
Co · Static load rating
1.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 213 2F+H 2313

Cross references

ManufacturerDesignation / part number
SKFYSA 213-2FK + H 2313
SNRUK213 + H2313
NTNUK213D1;H2313X
FAGUK213 + H2313X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes

Downloads

LK 213 2F+H 2313

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter65mm
DOutside diameter120mm
BWidth inner ring38mm
CWidth outer ring27mm
d1Outer diameter inner ring82.5mm
EDistance from raceway centre to the hole for lubrication7.6mm
d2Bore diameter-adapter sleeve60mm
LWidth adapter sleeve65mm
WKM nut outside diameter98mm
YKM nut width14mm
CdynDynamic load rating57kN
CoStatic load rating40kN
PuFatigue load limit1.18kN
kgMass1.7kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 213 2F+H 2313
Technical drawingClick to enlarge