Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 212 2F+H 2312

LK 212 2F+H 2312

Y-Ball Bearings With Adapter Sleeve

60mm
d · Bore diameter
110mm
D · Outside diameter
52kN
Cdyn · Dynamic load rating
36kN
Co · Static load rating
1.4kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 212 2F+H 2312

Cross references

ManufacturerDesignation / part number
SKFYSA 212-2FK + H 2312
SNRUK212 + H2312
NTNUK212D1;H2312X
FAGUK212 + H2312X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes

Downloads

LK 212 2F+H 2312

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
DOutside diameter110mm
BWidth inner ring42.5mm
CWidth outer ring26mm
d1Outer diameter inner ring75.5mm
EDistance from raceway centre to the hole for lubrication7.7mm
d2Bore diameter-adapter sleeve55mm
LWidth adapter sleeve62mm
WKM nut outside diameter80mm
YKM nut width13mm
CdynDynamic load rating52kN
CoStatic load rating36kN
PuFatigue load limit1.06kN
kgMass1.4kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 212 2F+H 2312
Technical drawingClick to enlarge