Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 215 2F

LK 215 2F

Y-Ball Bearings With Tapered Bore

75mm
d · Bore diameter
130mm
D · Outside diameter
62kN
Cdyn · Dynamic load rating
44.5kN
Co · Static load rating
1.54kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 215 2F

Cross references

ManufacturerDesignation / part number
SNRUK215G2
NTNUK215D1
FAGUK215

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LK 215 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter75mm
DOutside diameter130mm
BWidth inner ring41mm
CWidth outer ring29mm
d1Outer diameter inner ring92.1mm
EDistance from raceway centre to the hole for lubrication8.3mm
d2Bore diameter-adapter sleeve65mm
CdynDynamic load rating62kN
CoStatic load rating44.5kN
PuFatigue load limit1.44kN
kgMass1.54kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 215 2F
Technical drawingClick to enlarge