Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 217 2F+H 2317

LK 217 2F+H 2317

Y-Ball Bearings With Adapter Sleeve

85mm
d · Bore diameter
150mm
D · Outside diameter
85kN
Cdyn · Dynamic load rating
65kN
Co · Static load rating
3.92kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 217 2F+H 2317

Cross references

ManufacturerDesignation / part number
SNRUK217 + H2317
NTNUK217D1;H2317X
FAGUK217 + H2317X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes
LK 217 2F+H 2317

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter85mm
DOutside diameter150mm
BWidth inner ring46mm
CWidth outer ring34mm
d1Outer diameter inner ring105mm
EDistance from raceway centre to the hole for lubrication8.2mm
d2Bore diameter-adapter sleeve75mm
LWidth adapter sleeve82mm
WKM nut outside diameter110mm
YKM nut width18mm
CdynDynamic load rating85kN
CoStatic load rating65kN
PuFatigue load limit1.72kN
kgMass3.92kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 217 2F+H 2317
Technical drawingClick to enlarge