Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type P
  6. UYP 206 2S.H.Br

UYP 206 2S.H.Br

30mm
d · Bore diameter
90.5mm
J · Distance between the holes
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.46kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYP 206 2S.H.Br

Cross references

Equivalents of the standard version UYP 206 2S

ManufacturerDesignation / part number
SKFPFT 30 FM
INARAT30
SNRESPFL206
NTNAELPFL206W3

UYP 206 2S.H.Br has the same mounting dimensions as the standard version UYP 206 2S and differs from it in its seals, lubrication or surface finish. Listed are the type equivalents of the standard version according to FKL's interchange table, checked in the makers' catalogues.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
Br
Blackened: Br1, Br2, Br6, Br8, Br9, Br28,... 1-... outer ring 2-... inner ring 6-... flinger 8-... locking collar 9-... all outside surfaces 28-... inner ring + locking collar
All prefixes and suffixes
UYP 206 2S.H.Br

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
B1Width inner ring with locking collar35.7mm
DaCentering diameter71mm
ADistance from the housing flange to the front of the inner ring of the bearing29.2mm
A1Housing flange thickness2.5mm
A2Height of the housing9.5mm
HHousing height112mm
JDistance between the holes90.5mm
NLength of attachment bolt square hole10.5mm
FrRadial load5kN
FaAxial load2.5kN
kgMass0.46kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYP 206 2S.H.Br
Technical drawingClick to enlarge