Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type P
  6. UEP 207 2S

UEP 207 2S

Y-Bearing Flanged Units With Oval Pressed Steel Housing "P"

35mm
d · Bore diameter
100mm
J · Distance between the holes
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.6kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEP 207 2S

Cross references

ManufacturerDesignation / part number
SKFPFT35RM
INARATY35
SIPUEP 207 2S

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UEP 207 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DaCentering diameter81mm
LOverall width94mm
ADistance from the housing flange to the front of the inner ring of the bearing25.8mm
A1Housing flange thickness2.5mm
A2Height of the housing10.5mm
HHousing height122mm
JDistance between the holes100mm
NLength of attachment bolt square hole10.5mm
FrRadial load6.5kN
FaAxial load3.2kN
kgMass0.6kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEP 207 2S
Technical drawingClick to enlarge