Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type P
  6. UEP 204 2S

UEP 204 2S

Y-Bearing Flanged Units With Oval Pressed Steel Housing "P"

20mm
d · Bore diameter
71.4mm
J · Distance between the holes
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.22kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEP 204 2S

Cross references

ManufacturerDesignation / part number
НАВИГАТОРUEP 204 2S

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
SKFPFT 20 RM
INARATY20
SNRUSPFL204
NTNASPFL204

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UEP 204 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DaCentering diameter51mm
LOverall width67mm
ADistance from the housing flange to the front of the inner ring of the bearing20.3mm
A1Housing flange thickness2mm
A2Half-housing width8mm
HHousing height91mm
JDistance between the holes71.4mm
NLength of attachment bolt square hole8.7mm
kgMass0.22kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.275kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEP 204 2S
Technical drawingClick to enlarge