Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type P
  6. LYP 206 2F

LYP 206 2F

Y-Bearing Flanged Units With Oval Pressed Steel Housing "P"

30mm
d · Bore diameter
90.5mm
J · Distance between the holes
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.53kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYP 206 2F

Cross references

ManufacturerDesignation / part number
SKFPFT 30 WF

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYP 206 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
DaCentering diameter71mm
LOverall width84mm
ADistance from the housing flange to the front of the inner ring of the bearing32.6mm
A1Housing flange thickness2.5mm
A2Height of the housing9.5mm
HHousing height112mm
JDistance between the holes90.5mm
NLength of attachment bolt square hole10.5mm
FrRadial load5kN
FaAxial load2.5kN
kgMass0.53kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYP 206 2F
Technical drawingClick to enlarge