Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 210-115 2S

UY 210-115 2S

Y-Ball Bearings With Eccentric Locking Collar

49.213mm
d · Bore diameter
90mm
D · Outside diameter
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
0.749kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 210-115 2S

Cross references

ManufacturerDesignation / part number
SKFYET 210-115
INAGRA115-NPP-B-AS2/V
NTNAEL210-115W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UY 210-115 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter49.213mm
DOutside diameter90mm
BWidth inner ring30.2mm
CWidth outer ring22mm
sDistance from inner ring side face to raceway centre11mm
d1Outer diameter inner ring62.5mm
EDistance from raceway centre to the hole for lubrication6.4mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar43.7mm
d2Locking collar outside diameter67.6mm
B2Width locking collar18.3mm
kgMass0.749kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 210-115 2S
Technical drawingClick to enlarge