Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 208-108 2S

UY 208-108 2S

Y-Ball Bearings With Eccentric Locking Collar

38.1mm
d · Bore diameter
80mm
D · Outside diameter
32.5kN
Cdyn · Dynamic load rating
19.8kN
Co · Static load rating
0.623kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 208-108 2S

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD9202
JOHN DEEREJD9334
JOHN DEEREJD9201
JOHN DEEREAE48913
CASE664175R91
SKFYET 208-108
INAGRA108NPPB-AS2/V
MASSEY FERGUSON50468
MASSEY FERGUSON833416M1
NTNAEL 208-108
MASSEY FERGUSON664073R91
JOHN DEEREJD9354
NEW HOLLAND478037
NTNAJL208-108D1.C301
Hesston050-468
CASE663560R91
CASE664073R92
CASE664174R91
CASE664175R92
Hesston700050-468
Hesston700050468
Hesston700713198
NEW HOLLAND80052443
NEW HOLLAND80240953
MASSEY FERGUSON832122M1
MASSEY FERGUSON834204M1
NEW HOLLAND89845576
CASE474002R91
CASE474005R91
Hesston50468
NEW HOLLAND52443
CASEFHO50468
NEW HOLLAND47508360
CASE478038R92
CASE478038R91
SNRES208-24G2
FAFNIRGRA 108 RRB

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UY 208-108 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter38.1mm
DOutside diameter80mm
BWidth inner ring29.7mm
CWidth outer ring21mm
sDistance from inner ring side face to raceway centre11mm
d1Outer diameter inner ring51.8mm
EDistance from raceway centre to the hole for lubrication6.1mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar43.7mm
d2Locking collar outside diameter58.2mm
B2Width locking collar18.3mm
kgMass0.623kg
CdynDynamic load rating32.5kN
CoStatic load rating19.8kN
PuFatigue load limit0.832kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 208-108 2S
Technical drawingClick to enlarge