Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 208-108 2S.SH

UY 208-108 2S.SH

Y-Ball Bearings With Eccentric Locking Collar

38.1mm
d · Bore diameter
80mm
D · Outside diameter
32.5kN
Cdyn · Dynamic load rating
19.8kN
Co · Static load rating
0.623kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 208-108 2S.SH

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD10180

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
SNRCES208-24

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes

Downloads

UY 208-108 2S.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter38.1mm
DOutside diameter80mm
BWidth inner ring29.7mm
CWidth outer ring21mm
sDistance from inner ring side face to raceway centre11mm
d1Outer diameter inner ring51.8mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar43.7mm
d2Locking collar outside diameter58.2mm
B2Width locking collar18.3mm
kgMass0.623kg
CdynDynamic load rating32.5kN
CoStatic load rating19.8kN
PuFatigue load limit0.832kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 208-108 2S.SH
Technical drawingClick to enlarge