Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 207-106 2S.H

UY 207-106 2S.H

Y-Ball Bearings With Eccentric Locking Collar

34.925mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.45kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 207-106 2S.H

Cross references

Equivalents of the standard version UY 207-106 2S

ManufacturerDesignation / part number
SKFYET 207-106
INAGRA106-NPP-B-AS2/V
SNRES207-22G2
NTNAEL207-106W3

UY 207-106 2S.H has the same mounting dimensions as the standard version UY 207-106 2S and differs from it in its seals, lubrication or surface finish. Listed are the type equivalents of the standard version according to FKL's interchange table, checked in the makers' catalogues.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes

Downloads

UY 207-106 2S.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter34.925mm
DOutside diameter72mm
BWidth inner ring25.4mm
CWidth outer ring19mm
sDistance from inner ring side face to raceway centre9.5mm
d1Outer diameter inner ring46.1mm
GsSet screw3/8-24 UNFmm
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1mm
B1Width inner ring with locking collar38.9mm
d2Locking collar outside diameter51.2mm
B2Width locking collar17.5mm
kgMass0.45kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.66kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 207-106 2S.H
Technical drawingClick to enlarge