Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 206-104 2S.SH

UY 206-104 2S.SH

Y-Ball Bearings With Eccentric Locking Collar

31.75mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.316kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 206-104 2S.SH

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD10158
JOHN DEEREL1912C
CASE1302725C91
SKFYET 206-104W
INARA104-206NPPB

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
UY 206-104 2S.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter31.75mm
DOutside diameter62mm
BWidth inner ring23.8mm
CWidth outer ring18mm
sDistance from inner ring side face to raceway centre9mm
d1Outer diameter inner ring39.7mm
GsSet screw5/16-24 UNFinch
swHexagonal key size for set screw3.969mm
swHexagonal key size for set screw5/32inch
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar35.7mm
d2Locking collar outside diameter44.2mm
B2Width locking collar16mm
kgMass0.316kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.48kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 206-104 2S.SH
Technical drawingClick to enlarge