Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 206 2S.H

UY 206 2S.H

Y-Ball Bearings With Eccentric Locking Collar

30mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.3kN
Co · Static load rating
0.3kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 206 2S.H

Cross references

ManufacturerDesignation / part number
CNHUY 206 2S.H
SIPMAUY 206 2S.H
SKFYET206W
INAGRAE30NPP-AS2/V
JOHN DEEREJD39103
NWGPEA 206
RHP1230-30EC

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes

Downloads

UY 206 2S.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
DOutside diameter62mm
BWidth inner ring23.8mm
CWidth outer ring18mm
sDistance from inner ring side face to raceway centre9mm
d1Outer diameter inner ring39.7mm
GsSet screwM8x1mm
swHexagonal key size for set screw4mm
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.8mm
B1Width inner ring with locking collar35.7mm
d2Locking collar outside diameter44.2mm
B2Width locking collar16mm
kgMass0.3kg
CdynDynamic load rating19.5kN
CoStatic load rating11.3kN
PuFatigue load limit0.48kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 206 2S.H
Technical drawingClick to enlarge