Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 205-014 2S

UY 205-014 2S

Y-Ball Bearings With Eccentric Locking Collar

22.225mm
d · Bore diameter
52mm
D · Outside diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.2kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 205-014 2S

Cross references

ManufacturerDesignation / part number
SNRES205-14G2
INAGRA014NPPB-AS2/V
SKFYET 205-014
JOHN DEEREAE28289
JOHN DEEREJD9414
FAFNIRRA014RRB
MASSEY FERGUSON834197M1

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UY 205-014 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter22.225mm
DOutside diameter52mm
BWidth inner ring21.5mm
CWidth outer ring15mm
sDistance from inner ring side face to raceway centre7.5mm
d1Outer diameter inner ring33.6mm
EDistance from raceway centre to the hole for lubrication4.3mm
GsSet screw1/4-28 UNFinch
swHexagonal key size for set screw3.175mm
swHexagonal key size for set screw1/8inch
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar31mm
d2Locking collar outside diameter37.4mm
B2Width locking collar13.5mm
kgMass0.2kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.34kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 205-014 2S
Technical drawingClick to enlarge