Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 203-008 2S.H

UY 203-008 2S.H

Y-Ball Bearings With Eccentric Locking Collar

12.7mm
d · Bore diameter
40mm
D · Outside diameter
9.56kN
Cdyn · Dynamic load rating
4.75kN
Co · Static load rating
0.125kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 203-008 2S.H

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD9309

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Equivalents of the standard version UY 203-008 2S

ManufacturerDesignation / part number
SKFYET 203-008
SNRES201-08G2
NTNAEL201-008W3

UY 203-008 2S.H has the same mounting dimensions as the standard version UY 203-008 2S and differs from it in its seals, lubrication or surface finish. Listed are the type equivalents of the standard version according to FKL's interchange table, checked in the makers' catalogues.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes
UY 203-008 2S.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter12.7mm
DOutside diameter40mm
BWidth inner ring19.1mm
CWidth outer ring12mm
sDistance from inner ring side face to raceway centre6.2mm
d1Outer diameter inner ring24.2mm
GsSet screw1/4-28 UNFinch
swHexagonal key size for set screw3.175mm
swHexagonal key size for set screw1/8inch
r1,2Inner ring Chamfer dimension0.3mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar28.6mm
d2Locking collar outside diameter28.6mm
B2Width locking collar13.5mm
kgMass0.125kg
CdynDynamic load rating9.56kN
CoStatic load rating4.75kN
PuFatigue load limit0.2kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 203-008 2S.H
Technical drawingClick to enlarge