Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 212 2S.SH

UY 212 2S.SH

Y-Ball Bearings With Eccentric Locking Collar

60mm
d · Bore diameter
110mm
D · Outside diameter
52.7kN
Cdyn · Dynamic load rating
36kN
Co · Static load rating
1.3kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 212 2S.SH

Cross references

ManufacturerDesignation / part number
INARAE60-NPP

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
UY 212 2S.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
DOutside diameter110mm
BWidth inner ring37.5mm
CWidth outer ring26mm
sDistance from inner ring side face to raceway centre13.5mm
d1Outer diameter inner ring75.5mm
EDistance from raceway centre to the hole for lubrication7.7mm
GsSet screwM10x2mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1.5mm
r3,4Outside ring Chamfer dimension2mm
B1Width inner ring with locking collar53.3mm
d2Locking collar outside diameter84mm
B2Width locking collar22.3mm
CdynDynamic load rating52.7kN
CoStatic load rating36kN
PuFatigue load limit1.53kN
kgMass1.3kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 212 2S.SH
Technical drawingClick to enlarge