Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. UES 210 2S

UES 210 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

50mm
d · Bore diameter
206mm
L · Overall length
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
2.59kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UES 210 2S

Cross references

ManufacturerDesignation / part number
INAPASEY50-N
SNRUSP210
SNRUSPE210

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UES 210 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
LOverall length206mm
AHousing contact surface width58mm
A1Width of the top of the housing38mm
HHousing height113.2mm
H1Distance from the contact surface to the bearing axis57.2mm
H2Housing foot thickness22mm
JminMin. distance between the holes151mm
JmaxMax. distance between the holes164mm
NDiameter of attachment slot20mm
N1Length of attachment slot26.5mm
s1Distance from locking device side face to raceway centre27.6mm
kgMass2.59kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UES 210 2S
Technical drawingClick to enlarge