Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. UYS 210 2S

UYS 210 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

50mm
d · Bore diameter
206mm
L · Overall length
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
2.73kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYS 210 2S

Cross references

ManufacturerDesignation / part number
SKFSYJ50FM
INAPASE50N
SNRESPE 210
SNRESP210

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYS 210 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
LOverall length206mm
AHousing contact surface width58mm
A1Width of the top of the housing38mm
HHousing height113.2mm
H1Distance from the contact surface to the bearing axis57.2mm
H2Housing foot thickness22mm
JminMin. distance between the holes151mm
JmaxMax. distance between the holes164mm
NDiameter of attachment slot20mm
N1Length of attachment slot26.5mm
s1Distance from locking device side face to raceway centre32.7mm
kgMass2.73kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYS 210 2S
Technical drawingClick to enlarge