Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. LSS 209 2F

LSS 209 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

45mm
d · Bore diameter
190mm
L · Overall length
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
2.25kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LSS 209 2F

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LSS 209 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
LOverall length190mm
AHousing contact surface width52mm
A1Width of the top of the housing36mm
HHousing height107mm
H1Distance from the contact surface to the bearing axis54mm
H2Housing foot thickness20mm
JminMin. distance between the holes136mm
JmaxMax. distance between the holes151mm
NDiameter of attachment slot17mm
N1Length of attachment slot23.5mm
s1Distance from locking device side face to raceway centre17.5mm
kgMass2.25kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LSS 209 2F
Technical drawingClick to enlarge