Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. UYS 209 2S

UYS 209 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

45mm
d · Bore diameter
190mm
L · Overall length
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
2.34kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYS 209 2S

Cross references

ManufacturerDesignation / part number
SKFSY 45 FM
INAPASE45
SNRESP209
SNRESPE209

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYS 209 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
LOverall length190mm
AHousing contact surface width52mm
A1Width of the top of the housing36mm
HHousing height107mm
H1Distance from the contact surface to the bearing axis54mm
H2Housing foot thickness20mm
JminMin. distance between the holes136mm
JmaxMax. distance between the holes151mm
NDiameter of attachment slot17mm
N1Length of attachment slot23.5mm
s1Distance from locking device side face to raceway centre32.7mm
kgMass2.34kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYS 209 2S
Technical drawingClick to enlarge