Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. UEG 204 2S

UEG 204 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

20mm
d · Bore diameter
78mm
J · Pitch circle diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.65kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEG 204 2S

Cross references

ManufacturerDesignation / part number
INAPMEY20-N
SNRUSFC204

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UEG 204 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DaCentering diameter62mm
LOverall width100mm
ADistance from the housing flange to the front of the inner ring of the bearing28.3mm
A1Total housing width25.5mm
A2Housing flange thickness7mm
A3Centering diameter height5mm
JPitch circle diameter78mm
J1Distance between the holes55.1mm
NDiameter of attachment slot12mm
kgMass0.65kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEG 204 2S
Technical drawingClick to enlarge