Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LKG 206 2F + H2306

LKG 206 2F + H2306

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

25mm
d · Bore diameter
100mm
J · Pitch circle diameter
19.5kN
Cdyn · Dynamic load rating
11.3kN
Co · Static load rating
1.45kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKG 206 2F + H2306

Cross references

ManufacturerDesignation / part number
SNRUKFC206H
NTNUKFC206D1;H2306X
FAGUKFC206 + H2306X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKG 206 2F + H2306

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
DaCentering diameter80mm
LOverall width125mm
ADistance from the housing flange to the front of the inner ring of the bearing32mm
A1Total housing width31mm
A2Housing flange thickness8mm
A3Centering diameter height8mm
JPitch circle diameter100mm
J1Distance between the holes70.7mm
NDiameter of attachment slot12mm
kgMass1.45kg
CdynDynamic load rating19.5kN
CoStatic load rating11.3kN
PuFatigue load limit0.335kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKG 206 2F + H2306
Technical drawingClick to enlarge