Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LYG 204 2F

LYG 204 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

20mm
d · Bore diameter
78mm
J · Pitch circle diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.72kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYG 204 2F

Cross references

ManufacturerDesignation / part number
INARME20-N
SNREXFC204
NTNUELFC204D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYG 204 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DaCentering diameter62mm
LOverall width100mm
ADistance from the housing flange to the front of the inner ring of the bearing36.6mm
A1Total housing width25.5mm
A2Housing flange thickness7mm
A3Centering diameter height5mm
JPitch circle diameter78mm
J1Distance between the holes55.1mm
NDiameter of attachment slot12mm
kgMass0.72kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYG 204 2F
Technical drawingClick to enlarge