Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LKG 205 2F + H2305

LKG 205 2F + H2305

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

20mm
d · Bore diameter
90mm
J · Pitch circle diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.78kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKG 205 2F + H2305

Cross references

ManufacturerDesignation / part number
SNRUKFC205H
NTNUKFC205D1;H2305X
FAGUKFC205 + H2305X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKG 205 2F + H2305

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DaCentering diameter70mm
LOverall width115mm
ADistance from the housing flange to the front of the inner ring of the bearing30mm
A1Total housing width27mm
A2Housing flange thickness7mm
A3Centering diameter height6mm
JPitch circle diameter90mm
J1Distance between the holes63.6mm
NDiameter of attachment slot12mm
kgMass0.78kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.232kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKG 205 2F + H2305
Technical drawingClick to enlarge