Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LKF 213 2F + H2313

LKF 213 2F + H2313

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

60mm
d · Bore diameter
149mm
J · Pitch circle diameter
57kN
Cdyn · Dynamic load rating
40kN
Co · Static load rating
6kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKF 213 2F + H2313

Cross references

ManufacturerDesignation / part number
SKFFYJ 65 KF + H 2313
SNRUKF213H
NTNUKF213D1;H2313X
FAGUKF213 + H2313X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKF 213 2F + H2313

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
LOverall width187mm
ADistance from the housing flange to the front of the inner ring of the bearing65.8mm
A1Total housing width50mm
A2Housing flange thickness22mm
JPitch circle diameter149mm
NDiameter of attachment slot19mm
kgMass6kg
CdynDynamic load rating57kN
CoStatic load rating40kN
PuFatigue load limit1.18kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKF 213 2F + H2313
Technical drawingClick to enlarge