Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 210 2F+H 2310

LK 210 2F+H 2310

Y-Ball Bearings With Adapter Sleeve

50mm
d · Bore diameter
90mm
D · Outside diameter
35kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
0.86kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 210 2F+H 2310

Cross references

ManufacturerDesignation / part number
SKFYSA 210-2FK + H 2310
SNRUK210 + H2310
NTNUK210D1;H2310X
FAGUK210 + H2310X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes

Downloads

LK 210 2F+H 2310

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
DOutside diameter90mm
BWidth inner ring37mm
CWidth outer ring22mm
d1Outer diameter inner ring62.5mm
EDistance from raceway centre to the hole for lubrication6.4mm
d2Bore diameter-adapter sleeve45mm
LWidth adapter sleeve55mm
WKM nut outside diameter70mm
YKM nut width12mm
CdynDynamic load rating35kN
CoStatic load rating23.2kN
PuFatigue load limit0.695kN
kgMass0.86kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 210 2F+H 2310
Technical drawingClick to enlarge