Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 208 2F

LK 208 2F

Y-Ball Bearings With Tapered Bore

40mm
d · Bore diameter
80mm
D · Outside diameter
32.5kN
Cdyn · Dynamic load rating
19.8kN
Co · Static load rating
0.41kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 208 2F

Cross references

ManufacturerDesignation / part number
NTNUK208
NSKUK208
SKFYSA208-2F
SNRUK208G2
FAGUK208J7

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LK 208 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
DOutside diameter80mm
BWidth inner ring33.9mm
CWidth outer ring21mm
d1Outer diameter inner ring52mm
EDistance from raceway centre to the hole for lubrication6.1mm
d2Bore diameter-adapter sleeve35mm
CdynDynamic load rating32.5kN
CoStatic load rating19.8kN
PuFatigue load limit0.56kN
kgMass0.41kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 208 2F
Technical drawingClick to enlarge