Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 205 2F+H 2305

LK 205 2F+H 2305

Y-Ball Bearings With Adapter Sleeve

25mm
d · Bore diameter
52mm
D · Outside diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.22kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 205 2F+H 2305

Cross references

ManufacturerDesignation / part number
SKFYSA 205-2FK + H 2305
SNRUK205 + H2305
NTNUK205D1;H2305X
FAGUK205 + H2305X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes
LK 205 2F+H 2305

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
DOutside diameter52mm
BWidth inner ring24mm
CWidth outer ring15mm
d1Outer diameter inner ring33.6mm
EDistance from raceway centre to the hole for lubrication4.3mm
d2Bore diameter-adapter sleeve20mm
LWidth adapter sleeve35mm
WKM nut outside diameter38mm
YKM nut width8mm
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.232kN
kgMass0.22kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 205 2F+H 2305
Technical drawingClick to enlarge