Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LK
  6. LK 207 2F+H 2307

LK 207 2F+H 2307

Y-Ball Bearings With Adapter Sleeve

35mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.47kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LK 207 2F+H 2307

Cross references

ManufacturerDesignation / part number
SKFYSA 207-2FK + H 2307
SNRUK207 + H2307
NTNUK207D1;H2307X
FAGUK207 + H2307X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes

Downloads

LK 207 2F+H 2307

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DOutside diameter72mm
BWidth inner ring30.5mm
CWidth outer ring19mm
d1Outer diameter inner ring46.1mm
EDistance from raceway centre to the hole for lubrication5.6mm
d2Bore diameter-adapter sleeve30mm
LWidth adapter sleeve43mm
WKM nut outside diameter52mm
YKM nut width9mm
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.445kN
kgMass0.47kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LK 207 2F+H 2307
Technical drawingClick to enlarge