Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LEG 206 2F

LEG 206 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

30mm
d · Bore diameter
100mm
J · Pitch circle diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
1.4kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEG 206 2F

Cross references

ManufacturerDesignation / part number
SKFFYC30TF
NTNUCFC206
NSKUCFC206
FAGUCFC206J7
INARMEY30
SNRUCFC206
NTNM-UCFC206D1
ЧКЗ ОООLEG 206 2F

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LEG 206 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
DaCentering diameter80mm
LOverall width125mm
ADistance from the housing flange to the front of the inner ring of the bearing32.2mm
A1Total housing width31mm
A2Housing flange thickness8mm
A3Centering diameter height8mm
JPitch circle diameter100mm
J1Distance between the holes70.7mm
NDiameter of attachment slot12mm
kgMass1.4kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEG 206 2F
Technical drawingClick to enlarge