Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. UEG 206 2S

UEG 206 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

30mm
d · Bore diameter
100mm
J · Pitch circle diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
1.34kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEG 206 2S

Cross references

ManufacturerDesignation / part number
INAPMEY30-N
SNRUSFC206

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UEG 206 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
DaCentering diameter80mm
LOverall width125mm
ADistance from the housing flange to the front of the inner ring of the bearing31mm
A1Total housing width31mm
A2Housing flange thickness8mm
A3Centering diameter height8mm
JPitch circle diameter100mm
J1Distance between the holes70.7mm
NDiameter of attachment slot12mm
kgMass1.34kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEG 206 2S
Technical drawingClick to enlarge