Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. UEG 207 2S

UEG 207 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

35mm
d · Bore diameter
110mm
J · Pitch circle diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
1.57kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEG 207 2S

Cross references

ManufacturerDesignation / part number
INAPMEY35-N
SNRUSFC207

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UEG 207 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DaCentering diameter90mm
LOverall width135mm
ADistance from the housing flange to the front of the inner ring of the bearing34.3mm
A1Total housing width34mm
A2Housing flange thickness9mm
A3Centering diameter height8mm
JPitch circle diameter110mm
J1Distance between the holes77.8mm
NDiameter of attachment slot14mm
kgMass1.57kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEG 207 2S
Technical drawingClick to enlarge