Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 214 2F

LE 214 2F

Y-Ball Bearings With Grub Screw Locking

70mm
d · Bore diameter
125mm
D · Outside diameter
62.4kN
Cdyn · Dynamic load rating
44kN
Co · Static load rating
1.9kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 214 2F

Cross references

ManufacturerDesignation / part number
CLAAS963471.0
CLAAS212583.0
FAG56214
INAGYE70KRRB
NTNUC214
NSKUC214
SKFYAR214-2F
FAGUC214J7
SNRUC214G2
RHP1070-70G
NSKUC214D1
NTNM-UC214D1
PTIUC214X70MM

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LE 214 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter70mm
DOutside diameter125mm
BWidth inner ring69.9mm
CWidth outer ring28mm
sDistance from inner ring side face to raceway centre30.2mm
d1Outer diameter inner ring87.1mm
EDistance from raceway centre to the hole for lubrication8.1mm
GsSet screwM10x1mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1.5mm
r3,4Outside ring Chamfer dimension2mm
CdynDynamic load rating62.4kN
CoStatic load rating44kN
PuFatigue load limit1.86kN
kgMass1.9kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 214 2F
Technical drawingClick to enlarge