Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 215 2F

LE 215 2F

Y-Ball Bearings With Grub Screw Locking

75mm
d · Bore diameter
130mm
D · Outside diameter
66.3kN
Cdyn · Dynamic load rating
49kN
Co · Static load rating
2.1kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 215 2F

Cross references

ManufacturerDesignation / part number
FAG56215
INAGYE75KRRB
NTNUC215
NSKUC215
SKFYAR215-2F
FAGUC215J7
SNRUC215G2
RHP1075-75G
NSKUC215D1
NTNM-UC215D1

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LE 215 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter75mm
DOutside diameter130mm
BWidth inner ring73.3mm
CWidth outer ring29mm
sDistance from inner ring side face to raceway centre27mm
d1Outer diameter inner ring92.1mm
EDistance from raceway centre to the hole for lubrication8.3mm
GsSet screwM10x1mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1.5mm
r3,4Outside ring Chamfer dimension2mm
CdynDynamic load rating66.3kN
CoStatic load rating49kN
PuFatigue load limit2.04kN
kgMass2.1kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 215 2F
Technical drawingClick to enlarge