Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 312 2F.SH

LE 312 2F.SH

Y-Ball Bearings With Grub Screw Locking

60mm
d · Bore diameter
130mm
D · Outside diameter
81kN
Cdyn · Dynamic load rating
52kN
Co · Static load rating
2.6kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 312 2F.SH

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LE 312 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
DOutside diameter130mm
BWidth inner ring71mm
CWidth outer ring36mm
sDistance from inner ring side face to raceway centre26mm
d1Outer diameter inner ring81.8mm
EDistance from raceway centre to the hole for lubrication9mm
GsSet screwM12x1.6mm
swHexagonal key size for set screw6mm
r1,2Inner ring Chamfer dimension2.1mm
r3,4Outside ring Chamfer dimension2.1mm
CdynDynamic load rating81kN
CoStatic load rating52kN
PuFatigue load limit2.2kN
kgMass2.6kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 312 2F.SH
Technical drawingClick to enlarge