Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 213 2F

LE 213 2F

Y-Ball Bearings With Grub Screw Locking

65mm
d · Bore diameter
120mm
D · Outside diameter
57.2kN
Cdyn · Dynamic load rating
40kN
Co · Static load rating
1.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 213 2F

Cross references

ManufacturerDesignation / part number
FAG56213
INAGYE65KRRB
NTNUC213
NSKUC213
FAGUC213J7
SNRUC213G2
SKFYAR213-2F
RHP1065-65G
NSKUC213D1
NTNM-UC213D1

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LE 213 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter65mm
DOutside diameter120mm
BWidth inner ring68.3mm
CWidth outer ring27mm
sDistance from inner ring side face to raceway centre25.4mm
d1Outer diameter inner ring82.5mm
EDistance from raceway centre to the hole for lubrication7.6mm
GsSet screwM10x1mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1.5mm
r3,4Outside ring Chamfer dimension2mm
CdynDynamic load rating57.2kN
CoStatic load rating40kN
PuFatigue load limit1.7kN
kgMass1.7kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 213 2F
Technical drawingClick to enlarge