Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type U
  6. UYU 204 2S

UYU 204 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "U"

20mm
d · Bore diameter
50.8mm
J · Pitch circle diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.56kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYU 204 2S

Cross references

ManufacturerDesignation / part number
SKFSYF20FM
INAPSHE20N

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYU 204 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
LOverall length65mm
AHousing contact surface width32mm
A1Width of the top of the housing21mm
HHousing height63.8mm
H1Distance from the contact surface to the bearing axis33.3mm
JPitch circle diameter50.8mm
GThreadM10mm
G1Thread length14mm
s1Distance from locking device side face to raceway centre23.5mm
kgMass0.56kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYU 204 2S
Technical drawingClick to enlarge