Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type U
  6. LSU 205 2F

LSU 205 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "U"

25mm
d · Bore diameter
50.8mm
J · Pitch circle diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.65kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LSU 205 2F

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LSU 205 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
LOverall length70mm
AHousing contact surface width36mm
A1Width of the top of the housing22mm
HHousing height69.5mm
H1Distance from the contact surface to the bearing axis36.5mm
JPitch circle diameter50.8mm
GThreadM14mm
G1Thread length15mm
s1Distance from locking device side face to raceway centre12mm
kgMass0.65kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.335kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LSU 205 2F
Technical drawingClick to enlarge