Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type U
  6. LYU 204 2F

LYU 204 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "U"

20mm
d · Bore diameter
50.8mm
J · Pitch circle diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.59kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYU 204 2F

Cross references

ManufacturerDesignation / part number
INARSHE20-N
SNREXPAE204

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYU 204 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
LOverall length65mm
AHousing contact surface width32mm
A1Width of the top of the housing21mm
HHousing height63.8mm
H1Distance from the contact surface to the bearing axis33.3mm
JPitch circle diameter50.8mm
GThreadM11mm
G1Thread length14mm
s1Distance from locking device side face to raceway centre26.6mm
kgMass0.59kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYU 204 2F
Technical drawingClick to enlarge