Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. UYS 212 2S

UYS 212 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

60mm
d · Bore diameter
241mm
L · Overall length
52.7kN
Cdyn · Dynamic load rating
36kN
Co · Static load rating
4.19kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYS 212 2S

Cross references

ManufacturerDesignation / part number
TECHNIKA-SERVICEUYS 212 2S

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
SKFSY 60 FM
INAPASE60-N
SNRESP212
SNRESPE212

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYS 212 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
LOverall length241mm
AHousing contact surface width65mm
A1Width of the top of the housing47mm
HHousing height136.8mm
H1Distance from the contact surface to the bearing axis69.8mm
H2Housing foot thickness26.5mm
JminMin. distance between the holes179mm
JmaxMax. distance between the holes198mm
NDiameter of attachment slot20mm
N1Length of attachment slot29.5mm
s1Distance from locking device side face to raceway centre40.3mm
kgMass4.19kg
CdynDynamic load rating52.7kN
CoStatic load rating36kN
PuFatigue load limit1.53kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYS 212 2S
Technical drawingClick to enlarge