Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. LES 212 2F

LES 212 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

60mm
d · Bore diameter
241mm
L · Overall length
52.7kN
Cdyn · Dynamic load rating
36kN
Co · Static load rating
4.62kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LES 212 2F

Cross references

ManufacturerDesignation / part number
SKFSYJ60TF
NTNUCP212
NSKUCP212
FAGUCP212J7
INARASEY60
SNRUCPE212
SNRUCP212
ООО ЗапагромашLES 212 2F

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LES 212 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
LOverall length241mm
AHousing contact surface width65mm
A1Width of the top of the housing47mm
HHousing height136.8mm
H1Distance from the contact surface to the bearing axis69.8mm
H2Housing foot thickness26.5mm
JminMin. distance between the holes179mm
JmaxMax. distance between the holes198mm
NDiameter of attachment slot20mm
N1Length of attachment slot29.5mm
s1Distance from locking device side face to raceway centre39.7mm
kgMass4.62kg
CdynDynamic load rating52.7kN
CoStatic load rating36kN
PuFatigue load limit1.53kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LES 212 2F
Technical drawingClick to enlarge