Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. LKS 213 2F + H2313

LKS 213 2F + H2313

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

60mm
d · Bore diameter
265mm
L · Overall length
57kN
Cdyn · Dynamic load rating
40kN
Co · Static load rating
5.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKS 213 2F + H2313

Cross references

ManufacturerDesignation / part number
SKFSYJ 65 KF + H 2313
SNRUKP213H
SNRUKPE213H
NTNUKP213D1;H2313X
FAGUKP213 + H2313X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKS 213 2F + H2313

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
LOverall length265mm
AHousing contact surface width70mm
A1Width of the top of the housing49mm
HHousing height150mm
H1Distance from the contact surface to the bearing axis76.2mm
H2Housing foot thickness27mm
JminMin. distance between the holes193mm
JmaxMax. distance between the holes213mm
NDiameter of attachment slot25mm
N1Length of attachment slot35mm
s1Distance from locking device side face to raceway centre35.8mm
kgMass5.7kg
CdynDynamic load rating57kN
CoStatic load rating40kN
PuFatigue load limit1.18kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKS 213 2F + H2313
Technical drawingClick to enlarge