Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 209 2S.H

UY 209 2S.H

Y-Ball Bearings With Eccentric Locking Collar

45mm
d · Bore diameter
85mm
D · Outside diameter
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
0.65kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 209 2S.H

Cross references

Equivalents of the standard version UY 209 2S

ManufacturerDesignation / part number
SKFYET 209
INAGRAE45-NPP-B
SNRES209G2
NTNAEL209W3

UY 209 2S.H has the same mounting dimensions as the standard version UY 209 2S and differs from it in its seals, lubrication or surface finish. Listed are the type equivalents of the standard version according to FKL's interchange table, checked in the makers' catalogues.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes

Downloads

UY 209 2S.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
DOutside diameter85mm
BWidth inner ring30.2mm
CWidth outer ring22mm
sDistance from inner ring side face to raceway centre11mm
d1Outer diameter inner ring56.8mm
GsSet screwM10x1mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.2mm
B1Width inner ring with locking collar43.7mm
d2Locking collar outside diameter63.5mm
B2Width locking collar18.3mm
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.92kN
kgMass0.65kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 209 2S.H
Technical drawingClick to enlarge